Sptool
TODO Translated desciptions in the help menus & here are coming soon. 帮助菜单和此处的翻译描述即将推出。
NAME:
sptool - Manage Filecoin Miner Actor
USAGE:
sptool [global options] command [command options] [arguments...]
VERSION:
1.23.0
COMMANDS:
actor Manage Filecoin Miner Actor Metadata
info Print miner actor info
sectors interact with sector store
proving View proving information
help, h Shows a list of commands or help for one command
GLOBAL OPTIONS:
--log-level value (default: "info")
--actor value miner actor to manage [$SP_ADDRESS]
--help, -h show help
--version, -v print the versionsptool actor
NAME:
sptool actor - Manage Filecoin Miner Actor Metadata
USAGE:
sptool actor command [command options] [arguments...]
COMMANDS:
set-addresses, set-addrs set addresses that your miner can be publicly dialed on
withdraw withdraw available balance to beneficiary
repay-debt pay down a miner's debt
set-peer-id set the peer id of your miner
set-owner Set owner address (this command should be invoked twice, first with the old owner as the senderAddress, and then with the new owner)
control Manage control addresses
propose-change-worker Propose a worker address change
confirm-change-worker Confirm a worker address change
compact-allocated compact allocated sectors bitfield
propose-change-beneficiary Propose a beneficiary address change
confirm-change-beneficiary Confirm a beneficiary address change
new-miner Initializes a new miner actor
help, h Shows a list of commands or help for one command
OPTIONS:
--help, -h show helpsptool actor set-addresses
NAME:
sptool actor set-addresses - set addresses that your miner can be publicly dialed on
USAGE:
sptool actor set-addresses [command options] <multiaddrs>
OPTIONS:
--from value optionally specify the account to send the message from
--gas-limit value set gas limit (default: 0)
--unset unset address (default: false)
--help, -h show helpsptool actor withdraw
NAME:
sptool actor withdraw - withdraw available balance to beneficiary
USAGE:
sptool actor withdraw [command options] [amount (FIL)]
OPTIONS:
--confidence value number of block confirmations to wait for (default: 5)
--beneficiary send withdraw message from the beneficiary address (default: false)
--help, -h show helpsptool actor repay-debt
NAME:
sptool actor repay-debt - pay down a miner's debt
USAGE:
sptool actor repay-debt [command options] [amount (FIL)]
OPTIONS:
--from value optionally specify the account to send funds from
--help, -h show helpsptool actor set-peer-id
NAME:
sptool actor set-peer-id - set the peer id of your miner
USAGE:
sptool actor set-peer-id [command options] <peer id>
OPTIONS:
--gas-limit value set gas limit (default: 0)
--help, -h show helpsptool actor set-owner
NAME:
sptool actor set-owner - Set owner address (this command should be invoked twice, first with the old owner as the senderAddress, and then with the new owner)
USAGE:
sptool actor set-owner [command options] [newOwnerAddress senderAddress]
OPTIONS:
--really-do-it Actually send transaction performing the action (default: false)
--help, -h show helpsptool actor control
NAME:
sptool actor control - Manage control addresses
USAGE:
sptool actor control command [command options] [arguments...]
COMMANDS:
list Get currently set control addresses. Note: This excludes most roles as they are not known to the immediate chain state.
set Set control address(-es)
help, h Shows a list of commands or help for one command
OPTIONS:
--help, -h show helpsptool actor control list
NAME:
sptool actor control list - Get currently set control addresses. Note: This excludes most roles as they are not known to the immediate chain state.
USAGE:
sptool actor control list [command options] [arguments...]
OPTIONS:
--verbose (default: false)
--help, -h show helpsptool actor control set
NAME:
sptool actor control set - Set control address(-es)
USAGE:
sptool actor control set [command options] [...address]
OPTIONS:
--really-do-it Actually send transaction performing the action (default: false)
--help, -h show helpsptool actor propose-change-worker
NAME:
sptool actor propose-change-worker - Propose a worker address change
USAGE:
sptool actor propose-change-worker [command options] [address]
OPTIONS:
--really-do-it Actually send transaction performing the action (default: false)
--help, -h show helpsptool actor confirm-change-worker
NAME:
sptool actor confirm-change-worker - Confirm a worker address change
USAGE:
sptool actor confirm-change-worker [command options] [address]
OPTIONS:
--really-do-it Actually send transaction performing the action (default: false)
--help, -h show helpsptool actor compact-allocated
NAME:
sptool actor compact-allocated - compact allocated sectors bitfield
USAGE:
sptool actor compact-allocated [command options] [arguments...]
OPTIONS:
--mask-last-offset value Mask sector IDs from 0 to 'highest_allocated - offset' (default: 0)
--mask-upto-n value Mask sector IDs from 0 to 'n' (default: 0)
--really-do-it Actually send transaction performing the action (default: false)
--help, -h show helpsptool actor propose-change-beneficiary
NAME:
sptool actor propose-change-beneficiary - Propose a beneficiary address change
USAGE:
sptool actor propose-change-beneficiary [command options] [beneficiaryAddress quota expiration]
OPTIONS:
--really-do-it Actually send transaction performing the action (default: false)
--overwrite-pending-change Overwrite the current beneficiary change proposal (default: false)
--actor value specify the address of miner actor
--help, -h show helpsptool actor confirm-change-beneficiary
NAME:
sptool actor confirm-change-beneficiary - Confirm a beneficiary address change
USAGE:
sptool actor confirm-change-beneficiary [command options] [minerID]
OPTIONS:
--really-do-it Actually send transaction performing the action (default: false)
--existing-beneficiary send confirmation from the existing beneficiary address (default: false)
--new-beneficiary send confirmation from the new beneficiary address (default: false)
--help, -h show helpsptool actor new-miner
NAME:
sptool actor new-miner - Initializes a new miner actor
USAGE:
sptool actor new-miner [command options] [arguments...]
OPTIONS:
--worker value, -w value worker key to use for new miner initialisation
--owner value, -o value owner key to use for new miner initialisation
--from value, -f value address to send actor(miner) creation message from
--sector-size value specify sector size to use for new miner initialisation
--confidence value number of block confirmations to wait for (default: 5)
--help, -h show helpsptool info
NAME:
sptool info - Print miner actor info
USAGE:
sptool info [command options] [arguments...]
OPTIONS:
--help, -h show helpsptool sectors
NAME:
sptool sectors - interact with sector store
USAGE:
sptool sectors command [command options] [arguments...]
COMMANDS:
status Get the seal status of a sector by its number
list List sectors
precommits Print on-chain precommit info
check-expire Inspect expiring sectors
expired Get or cleanup expired sectors
extend Extend expiring sectors while not exceeding each sector's max life
terminate Forcefully terminate a sector (WARNING: This means losing power and pay a one-time termination penalty(including collateral) for the terminated sector)
compact-partitions removes dead sectors from partitions and reduces the number of partitions used if possible
help, h Shows a list of commands or help for one command
OPTIONS:
--help, -h show helpsptool sectors status
NAME:
sptool sectors status - Get the seal status of a sector by its number
USAGE:
sptool sectors status [command options] <sectorNum>
OPTIONS:
--log, -l display event log (default: false)
--on-chain-info, -c show sector on chain info (default: false)
--partition-info, -p show partition related info (default: false)
--proof print snark proof bytes as hex (default: false)
--help, -h show helpsptool sectors list
NAME:
sptool sectors list - List sectors
USAGE:
sptool sectors list [command options] [arguments...]
OPTIONS:
--help, -h show helpsptool sectors precommits
NAME:
sptool sectors precommits - Print on-chain precommit info
USAGE:
sptool sectors precommits [command options] [arguments...]
OPTIONS:
--help, -h show helpsptool sectors check-expire
NAME:
sptool sectors check-expire - Inspect expiring sectors
USAGE:
sptool sectors check-expire [command options] [arguments...]
OPTIONS:
--cutoff value skip sectors whose current expiration is more than <cutoff> epochs from now, defaults to 60 days (default: 172800)
--help, -h show helpsptool sectors expired
NAME:
sptool sectors expired - Get or cleanup expired sectors
USAGE:
sptool sectors expired [command options] [arguments...]
OPTIONS:
--expired-epoch value epoch at which to check sector expirations (default: WinningPoSt lookback epoch)
--help, -h show helpsptool sectors extend
NAME:
sptool sectors extend - Extend expiring sectors while not exceeding each sector's max life
USAGE:
sptool sectors extend [command options] <sectorNumbers...(optional)>
OPTIONS:
--from value only consider sectors whose current expiration epoch is in the range of [from, to], <from> defaults to: now + 120 (1 hour) (default: 0)
--to value only consider sectors whose current expiration epoch is in the range of [from, to], <to> defaults to: now + 92160 (32 days) (default: 0)
--sector-file value provide a file containing one sector number in each line, ignoring above selecting criteria
--exclude value optionally provide a file containing excluding sectors
--extension value try to extend selected sectors by this number of epochs, defaults to 540 days (default: 1555200)
--new-expiration value try to extend selected sectors to this epoch, ignoring extension (default: 0)
--only-cc only extend CC sectors (useful for making sector ready for snap upgrade) (default: false)
--drop-claims drop claims for sectors that can be extended, but only by dropping some of their verified power claims (default: false)
--tolerance value don't try to extend sectors by fewer than this number of epochs, defaults to 7 days (default: 20160)
--max-fee value use up to this amount of FIL for one message. pass this flag to avoid message congestion. (default: "0")
--max-sectors value the maximum number of sectors contained in each message (default: 0)
--really-do-it pass this flag to really extend sectors, otherwise will only print out json representation of parameters (default: false)
--help, -h show helpsptool sectors terminate
NAME:
sptool sectors terminate - Forcefully terminate a sector (WARNING: This means losing power and pay a one-time termination penalty(including collateral) for the terminated sector)
USAGE:
sptool sectors terminate [command options] [sectorNum1 sectorNum2 ...]
OPTIONS:
--actor value specify the address of miner actor
--really-do-it pass this flag if you know what you are doing (default: false)
--from value specify the address to send the terminate message from
--help, -h show helpsptool sectors compact-partitions
NAME:
sptool sectors compact-partitions - removes dead sectors from partitions and reduces the number of partitions used if possible
USAGE:
sptool sectors compact-partitions [command options] [arguments...]
OPTIONS:
--deadline value the deadline to compact the partitions in (default: 0)
--partitions value [ --partitions value ] list of partitions to compact sectors in
--really-do-it Actually send transaction performing the action (default: false)
--help, -h show helpsptool proving
NAME:
sptool proving - View proving information
USAGE:
sptool proving command [command options] [arguments...]
COMMANDS:
info View current state information
deadlines View the current proving period deadlines information
deadline View the current proving period deadline information by its index
faults View the currently known proving faulty sectors information
help, h Shows a list of commands or help for one command
OPTIONS:
--help, -h show helpsptool proving info
NAME:
sptool proving info - View current state information
USAGE:
sptool proving info [command options] [arguments...]
OPTIONS:
--help, -h show helpsptool proving deadlines
NAME:
sptool proving deadlines - View the current proving period deadlines information
USAGE:
sptool proving deadlines [command options] [arguments...]
OPTIONS:
--all, -a Count all sectors (only live sectors are counted by default) (default: false)
--help, -h show helpsptool proving deadline
NAME:
sptool proving deadline - View the current proving period deadline information by its index
USAGE:
sptool proving deadline [command options] <deadlineIdx>
OPTIONS:
--sector-nums, -n Print sector/fault numbers belonging to this deadline (default: false)
--bitfield, -b Print partition bitfield stats (default: false)
--help, -h show helpsptool proving faults
NAME:
sptool proving faults - View the currently known proving faulty sectors information
USAGE:
sptool proving faults [command options] [arguments...]
OPTIONS:
--help, -h show helpLast updated